

















































The Crystal Quest Whole House Reverse Osmosis System purifies every tap in the home, not just the kitchen sink. A commercial-grade RO unit removes up to 99% of dissolved contaminants (including arsenic, fluoride, nitrates, sodium, PFAS and high TDS that filters and softeners can't touch), fills an atmospheric storage tank, and a repressurization pump delivers the water to the house on demand.
Choose your size by daily use: 300–400 GPD for 1–1.5 bathrooms, 500–2,500 GPD for up to 4 bathrooms, 4,000–7,000 GPD for 5+ bathrooms or high-use homes. Choose Standalone if you already have a storage tank and pump, or Add Storage Tank Kit for the complete package (tank, repressurization pump and float switches).
Full sizing guide, storage tank options, specifications and manuals are below. Not sure which size fits your home? Call 800-374-2143 and we'll size it from your water test and household.
Point-of-use RO units make a few gallons a day under the sink. A whole house system makes hundreds or thousands of gallons a day, so it needs three parts working together:
The Standalone option is the RO unit with pre-filtration and membranes only. The Add Storage Tank Kit options add the tank, pump and float switches.

Size by gallons per day (GPD) of purified water your household uses, with headroom for laundry and irrigation. A typical family of four uses 250–400 gallons a day at all fixtures; a well pump's flow rate also has to meet the minimum feed for the unit you pick.
| System size | Typical home | Storage tank in kit | Minimum feed flow to RO unit |
|---|---|---|---|
| 300–400 GPD | 1–1.5 bathrooms, or drinking and cooking supply for the whole home | 165 gal (31″ dia × 56″ H) | Not specified |
| 500–2,500 GPD | 1–4 bathrooms; most single-family homes land here | 220 gal (42″ dia × 44″ H) | 1.5 GPM (500–1,800 GPD); 4 GPM (2,500 GPD) |
| 4,000–7,000 GPD | 5+ bathrooms, estates, multi-family, small commercial | 550 gal (67″ dia × 44″ H) | 6 GPM (4,000); 7 GPM (5,000); 10 GPM (7,000) |
RO strips minerals along with contaminants, which leaves water slightly acidic and flat-tasting and can be aggressive to copper plumbing over time. A remineralizer after the tank adds calcium and magnesium back and raises pH. It's optional for taste, recommended for whole-house use. Size it to your system: 300–2,500 GPD uses the single Big Blue alkalizer/remineralizer; 4,000–5,000 GPD the 1.5 cu ft remineralizer system; 7,000 GPD the 2.0 cu ft version (call to order).
All sizes: 120/220 V, 150 PSI rated, 33–50% recovery, 1.5 HP repressurization pump in the tank kit. Dimensions are for the RO unit; tank dimensions are in the sizing table above.
| System | RO unit dimensions | Feed connection | Product connection | Waste connection | Feed flow (min–max) |
|---|---|---|---|---|---|
| 300–400 GPD | 7″ × 28″ × 33″ | 3/8″ | 3/8″ | 1/4″ | Household supply |
| 500 GPD | 14″ × 20″ × 27″ | 3/4″ | 3/8″ | 3/8″ | 1.5–3 GPM |
| 750 GPD | 14″ × 20″ × 27″ | 3/4″ | 3/8″ | 3/8″ | 1.5–3 GPM |
| 1,000 GPD | 14″ × 20″ × 27″ | 1″ | 3/8″ | 3/8″ | 1.5–3 GPM |
| 1,500 GPD | 14″ × 20″ × 46″ | 1″ | 3/8″ | 3/8″ | 1.5–5 GPM |
| 1,800 GPD | 14″ × 20″ × 46″ | 1″ | 3/8″ | 3/8″ | 1.5–5 GPM |
| 2,500 GPD | 14″ × 20″ × 46″ | 1″ | 3/8″ | 3/8″ | 4–10 GPM |
| 4,000 GPD | 30″ × 38″ × 47″ | 1″ | 1/2″ | 1/2″ | 6 GPM min |
| 5,000 GPD | 30″ × 38″ × 47″ | 1″ | 1/2″ | 1/2″ | 7 GPM min |
| 7,000 GPD | 30″ × 38″ × 47″ | 1″ | 1/2″ | 1/2″ | 10 GPM min |
Change the sediment pre-filter roughly every 6 months (sooner on turbid well water) and the RO membranes every 2–3 years depending on feed water. Replacement pre-filter cartridges and RO membranes for every size are in our replacement parts collection, or call us with your system size and we'll pull the right ones. Crystal Quest products are covered by the manufacturer's warranty plus Aqua Home Supply's five-year warranty.
Questions about sizing, pre-treatment or installation? Call 800-374-2143 or request a free system recommendation. See all reverse osmosis systems.