3M® Aqua-Pure AP900 Series

3M Aqua-Pure AP900 Series Whole House Water Filtration System

3M Water Filtration Products Models AP902/AP903/AP904 single cartridge whole house water filtration systems help provide consistent high-quality water for whole house filtration at peak flow rates up to 20 GPM (75.7 LPM).

• AP902 System reduces sediment down to 5 microns nominal while providing unrestricted flow with 1” NPT connections. This filter is ideal for larger homes and light commercial applications. Includes AP910R replacement cartridge.
• AP903 System reduces both sediment and chlorine taste and odor. The AP903 provides unrestricted flow with 1” NPT connections and is ideal for larger homes and light commercial applications. Includes AP917HD* replacement cartridge.
• AP904 System has been designed for heavy-duty sediment reduction (5 micron nominal). At 10 GPM average flow rate, this product performs at 75% efficiency over its rated capacity (100,000 gallons) based on the manufacturer's test protocol for chlorine taste and odor. The AP904 replacement cartridge (AP917HD-S) also includes a scale inhibition media to help reduce the potential build-up of hardness scale in water heaters, pipes, and water-using appliances.

Product Benefits:

• 304 stainless steel head allows for “sweat in place” installation and is a corrosion-resistant material.
• 1” inlet and outlet connections for easy installation and high flow rates up to 20 GPM (75.7 LPM).
• Tested and rated to 20 GPM (75.7 LPM) peak flow rate, meeting most residential and light commercial applications.
• Sanitary Quick Change (SQC) design, an industry first for this application, allows for fast and easy cartridge change-outs without the need for a filter wrench.
• An electronic countdown timer refrigerator magnet is included in the installation kit to help remind the homeowner when cartridge change-out time is near. • Manufactured from FDA CFR-21 compliant materials.
• 25-year limited warranty on stainless steel head.

Product Specifications:

Resources:

Product Replacement Filters:

Installation:

1. Turn off the water
2. Turn off the fuel or electrical power supply to the water heater.
3. Depressurize the water supply lines.

4. Cut pipe to length needed
5. Assemble filter head and optional bypass system.

6. Install system valves, piping and filter head into water supply system.
7. Install filter cartridge into head.

8. Turn on the water.
9. Flush the system.
10.Turn on the fuel or electrical power supply to the water heater.

Your system is now installed and ready to use!